Important note from the factory engineers.
Thank you for buying a Chrysler Group vehicle. We want your ownership of this vehicle to be a trouble free and pleasurable experience. To help you to have the best driving experience possible, we identified the specific Vehicle Maintenance Services that are required to keep your vehicle operating properly and safely. For the ultimate in vehicle service, we suggest that you allow us to perform these maintenance items for you. Our technicians have specific knowledge of your vehicle and have access to factory training and information, and specially designed electronic and mechanical tools that can help prevent future costly repairs.
Important note regarding vehicle maintenance and warranty coverage.
If you do not meet the minimum maintenance requirements for your vehicle, your vehicle could need costly and inconvenient repairs. Your New Vehicle Limited Warranty requires that you perform the scheduled maintenance at the times or mileages shown in your Owner's Manual. If you do not do so, and your vehicle fails as a result of your failure to maintain your vehicle for up to 100,000 miles, either by routinely having us or another qualified technician record the service performed in your Maintenance Logbook, or by keeping receipts or other documentation of work you've had done on your vehicle in your Maintenance Logbook. Should you sell your vehicle, this book can be used to show that regular and proper maintenance was performed on your vehicle. This may make your vehicle more appealing and valuable at resale time.
** Here are a few general maintenance items that should be checked on a regular basis.
** Consult your Maintenance Logbook for a full list of required maintenance items.
At Each Stop for Fuel
* Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will improve the accuracy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark.
* Check the windshield washer solvent, add as required.
Once a Month
* Check the tire pressure and look for unusual wear or damage.
* Inspect the battery and clean and tighten the terminals as required.
* Check the fluid levels of the coolant reservoir, brake master cylinder, power steering, & transmission, and add as needed.
* Check all lights and all other electrical items for correct operation.
If you would like help in determining the required maintenance for your vehicle, contact any one of our FIVE STAR Service Advisors at 866.791.7398
5 dos and don'ts when dealing with a mechanic - Delaying service can compromise a vehicle's safety
With the average age of vehicles currently on the road reaching an all-time high of 10.8 years according to the market research firm R.L. Polk in Southfield Mich., cost-conscious consumers are choosing to keep their existing cars and trucks running rather than trade them in for new models. Unfortunately, as a Consumer Reports survey revealed, that also means many drivers are postponing needed repairs or maintenance as a money-saving measure.
Unfortunately, delaying service not only represents false economy, it can compromise a car's safety. The car-care experts at AAA Motor Club in Heathrow, Fla. believe the best way to save money over the life of a vehicle is to choose a high-quality, full-service repair shop (or dealer's service department) and allow them do all of the necessary maintenance and repair work. "This helps prevent breakdowns, and often saves money by allowing drivers to make a small repair now rather than a much bigger one later," says John Nielsen, AAA's director of automotive repair.
But making the decision to bring in a car for service is only half the battle. To get the most for their maintenance and repair dollars consumers need to know how to best deal with an automotive technician so that a trip to the shop won't ultimately turn sour. According to an informal survey of independent mechanics and repair experts conducted by the online auto-service resource AutoMD.com, here's a list of do's to follow and don'ts to avoid when taking a car in for maintenance or repairs.
1. Communicate properly
The better a consumer is able to convey to a mechanic what's wrong with his or her vehicle the easier it is for a technician to diagnose and fix the problem. It's a good idea to write down ahead of time what ails your ride, noting specific sounds, sensations, leaks and smells, and when and how often they occur. What happened just before the car stopped running; how did it function the day before it didn't start? Also note when the vehicle was last brought in for service, as today's problem may be related to last month's repairs.
Here's a list of terms that can help explain common auto symptoms that can also serve as a checklist for a vehicle that's headed for the repair shop:
Backfire: A gunshot-like sound that comes from the engine or tailpipe.
Bottoming: Excessive noise or harshness that's usually felt through the steering wheel or passenger compartment when going over bumps.
Bucking: This is felt when the engine hesitates or the transmission slips as it changes gears and the vehicle lurches.
Dieseling: What occurs when an engine continues to burn fuel and runs briefly after the car has been switched off.
Hesitation: A brief loss of power upon acceleration.
Knocking: Also known as "detonation," this is a rapid rattling that's heard upon acceleration.
Misfire: Hesitation that occurs when fuel in one or more of an engine's cylinders fails to ignite properly.
Shimmy: A side-to-side motion that can be felt through the tires and/or steering wheel.
Sluggish: How a car feels when it's not accelerating smoothly or strongly enough.
Surge: A sudden, usually upward, change in the engine's speed.
2. Set realistic expectations
When it comes to auto repairs, quick, cheap and good are usually mutually exclusive terms. Plan to leave a car in the shop for the better part of a day to obtain necessary service and be prepared to pay the going rate for parts and labor. Even if it's a quick fix realize there may be several other cars ahead of yours in the mechanic's service queue. Ask up front how long the car will need to be in the shop and arrange for transportation to and from the repair facility. And always get a cost estimate before allowing the mechanic to proceed with repairs or service.
3. Don't drop off a dirty or cluttered vehicle
Not only is this common courtesy, it can affect the quality of a repair. Tidy up your ride before bringing it in for service and be sure to clear out the back seat and trunk of items like strollers, golf clubs and construction equipment. The mechanic may need to remove them to access a part or perform a specific repair, or they may weigh down the vehicle to the extent it affects its performance.
4. Make yourself available
Be sure to leave phone numbers with the shop where you can be reached and respond promptly. If the technician isn't able to contact you to approve a repair, the car will sit and remain unattended for that much longer. Likewise, you'll want to know that the car is ready and how much the service will cost before heading back to the shop.
5. Leave the technician alone
Just about every mechanic AutoMD.com conducted in the course of its service survey disliked customers hovering over him or her while they worked. While it's appropriate to spend time with your car and the mechanic to explain the problem, it's distracting and can be dangerous. If you'll be hanging around for a diagnosis or quick service, take a seat in the waiting room, grab a cup of coffee and let a professional do his or her job.
Forbes, By Jim Gorzelany, June 28, 2012